4in to 1 change ?
#1
My gen 2 has a 4in1 system with yoshi can . If i was to take system off and replace with 4into 2 with yoshi cans will the bike need to be put on dyno it does have 2 power comanders 1 fuel and 1 ignition .
Or take power comanders out as well and get ecu flashed ?
[Image: Resizeofbusa005.jpg] REGARDS ROD
MOBILE 0433 92 99 22
kangaroos1996@msn.com
Reply
#2
I vote take it all off and flash that sucker!! Biker
People are like turtles....... you don't move forward unless you stick your neck out!! Boobies4
Reply
#3
Rod when i had my Gen2 when i changed from standard exhaust to a 4to1 it made a big difference bike ran a bit rough and wasnt smooth in terms of power delivery. once i had it tuned it was good again. i imagine going backwards would be much the same. are you looking at putting standard headers back on with slipons or an aftermarket 4to2system? you could sell the PC's off to fund the flash just a thought.
Regards

Dan
Reply
#4
(18-11-2010, 04:41pm)Dan85 Wrote: Rod when i had my Gen2 when i changed from standard exhaust to a 4to1 it made a big difference bike ran a bit rough and wasnt smooth in terms of power delivery. once i had it tuned it was good again. i imagine going backwards would be much the same. are you looking at putting standard headers back on with slipons or an aftermarket 4to2system? you could sell the PC's off to fund the flash just a thought.

yes Dan standard headers with twin cans
[Image: Resizeofbusa005.jpg] REGARDS ROD
MOBILE 0433 92 99 22
kangaroos1996@msn.com
Reply
#5
in that case id at least look at just removing the pc's. we took a 4-1 system off a bike up here that had a tuned pc on it and replaced it with all stock headers and mufflers and it ran like a pig, disconnected the pc and it ran like stock again as they do. sorry i cant offer anything more technical than that mate.

(19-11-2010, 05:47am)ROD Wrote: yes Dan standard headers with twin cans
Regards

Dan
Reply
#6
if it was mine and you have a good tuner near by I would remove the pc's and flash, less things to go wrong plus as mentioned above you could recoup some of the cost of the flash from selling them.
Reply
#7
is it just astectics or is the 4-2 better than the 4-1 or is it just personal preffrences ?
Reply
#8
(18-11-2010, 03:35pm)ROD Wrote: My gen 2 has a 4in1 system with yoshi can . If i was to take system off and replace with 4into 2 with yoshi cans will the bike need to be put on dyno it does have 2 power comanders 1 fuel and 1 ignition .
Or take power comanders out as well and get ecu flashed ?

If your going back to 4-2 just pull the PC off it will be fine
If your keeping it & what it spot on re-Flash heaps better nothing can go wrong with it, (did I tell you I HATE Power Commanders )
Reply
#9
(19-11-2010, 10:06am)big kev Wrote: is it just astectics or is the 4-2 better than the 4-1 or is it just personal preffrences ?

Looks for me i prefer a busa with twin cans

Thanks simmo i will get it flashed , Or they tell me if you get drunk enough you will flash at it Scary
[Image: Resizeofbusa005.jpg] REGARDS ROD
MOBILE 0433 92 99 22
kangaroos1996@msn.com
Reply
#10
(19-11-2010, 06:58pm)ROD Wrote:
(19-11-2010, 10:06am)big kev Wrote: is it just astectics or is the 4-2 better than the 4-1 or is it just personal preffrences ?
Looks for me i prefer a busa with twin cans
Thanks simmo i will get it flashed , Or they tell me if you get drunk enough you will flash at it Scary

Not that I can ever remember Beer but I'm told someone who looks very like me has played up a little Lol2
Reply




Users browsing this thread: 1 Guest(s)