02-11-2006, 10:27pm
Suffering from infrequent front brake vibration, seems to occur more when the brakes are hot and when braking between certain speeds.
Mechanic had a look while fitting new rubber, and found that there is an uneven wear where the pads are gripping the disc. Also with a caliper it appears to be slightly out by about 1mm.
To have the front disc rotor bars straightened (if required) and the discs themselves ground down, is about $500 for both.
Just wondering if I should take this as a opportunity to Bling and replace the OEM with something extra special? Any thoughts?
Cheers,
Dave
<i></i>
Mechanic had a look while fitting new rubber, and found that there is an uneven wear where the pads are gripping the disc. Also with a caliper it appears to be slightly out by about 1mm.
To have the front disc rotor bars straightened (if required) and the discs themselves ground down, is about $500 for both.
Just wondering if I should take this as a opportunity to Bling and replace the OEM with something extra special? Any thoughts?
Cheers,
Dave
<i></i>