+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Hayabusa Tyres, Wheels & Suspension (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=7)
+--- Thread: 2004 BUSA REAR SPRING SPECS (/showthread.php?tid=9967)
2004 BUSA REAR SPRING SPECS - christopher - 25-05-2008
Hi i am just after information on the 2004 hayabusas rear suspension specs. length, rate, id/od of spring.
Thanks
RE: 2004 BUSA REAR SPRING SPECS - BLACKZOOK - 25-05-2008
It's been a while since I researched this for my 6" over arm but the stock rear is 13kg/mm. I went for a 17kg/mm Eibarch spring with gold valves for the long arm.
Best way is to do a search for rear spring on .org.
[b]
christopher Wrote:Hi i am just after information on the 2004 hayabusas rear suspension specs. length, rate, id/od of spring.
Thanks
RE: 2004 BUSA REAR SPRING SPECS - christopher - 26-05-2008
Thanks i contacted Suzuki Australia and they had no idea what so ever. They told me to contact Suzuki japan.
RE: 2004 BUSA REAR SPRING SPECS - 1300hayabusa - 26-05-2008
christopher Wrote:Thanks i contacted Suzuki Australia and they had no idea what so ever. They told me to contact Suzuki japan.
Typical bad attitude and no service from our beloved suppliers.What a joke considering they sell the stuff,how unprofessional!!!!!!!!!!
RE: 2004 BUSA REAR SPRING SPECS - christopher - 27-05-2008
Does anyone also know the inside and outside diameter of the spring?
RE: 2004 BUSA REAR SPRING SPECS - Maj - 27-05-2008
std spring is supposed to be around 13kg/mm
Racetech site has good info about std and recommended springs and settings.