+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Hayabusa Gen.II (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=45)
+--- Thread: oil filter for k8 (/showthread.php?tid=9815)
oil filter for k8 - REVIT13 - 01-05-2008
are they different or does anyone know the part number?
never too sure these days as the 08 has many differences. don't want to drop the oil over the weekend and find no ride for me until the following week.
cheers
RE: oil filter for k8 - simmo - 01-05-2008
Shit i hope not
Didn't check but it will be the same
(I hope)
RE: oil filter for k8 - CU00 - 28-05-2008
REVIT13 Wrote:are they different or does anyone know the part number?
never too sure these days as the 08 has many differences. don't want to drop the oil over the weekend and find no ride for me until the following week.
cheers
Hi Revit13,
A little late in replying, but just in case you're still running round with this perplexing thought, they're the same as the gen1's. I would suggest a filter socket to remove it with though as space is limited behind the headers, about $12 or $13 from memory. Side panel's a piece of cake to remove, just suggest putting a smear of silicon grease on the rubber grommits prior to refitting it.
RE: oil filter for k8 - Rev004 - 30-05-2008
Hi Fellars,
I'm not sure if you can get them for the Busa as I haven't looked at this stage but K&N do a Highflow filter that has a ring spanner / socket attachment on the front of there filters which means they are very easy to get off and you don't have to worry about any other gadgets to get remove them. I use to run them on my GSXR11.