![]() |
L.E.D Flasher - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5) +--- Thread: L.E.D Flasher (/showthread.php?tid=9467) |
L.E.D Flasher - ROD - 17-03-2008 What kind are you useing im trying to replace my Narva 68249 but can not find one in Brissy RE: L.E.D Flasher - horndog - 17-03-2008 BUSA-RO Wrote:What kind are you useing im trying to replace my Narva 68249 but can not find one in Brissy Try http://www.clearalternatives.com/ I just fitted some led indicators to my mates Trumpy 675. He ordered a relay from the link above. Havent fitted it yet though. We put a big ceramic 5 watt 370 Ohm resistors on each side of his indicators in the mean time. you can do that but be careful as they get very very hot!!!! RE: L.E.D Flasher - Busanthony - 07-05-2008 Anyone tried changing the relay plug to slow their LED Blinkers down? i have stock front blinkers and mini rears, the flashing speed increases after 5 seconds. check out the link below, is there a cheaper alternative/ cheaper same part? http://cgi.ebay.com.au/Suzuki-LED-Flasher-Relay-Plug-Play-GSXR-TL-SV-Hayabusa_W0QQitemZ280223529002QQihZ018QQcategoryZ35232QQssPageNameZWDVWQQrdZ1QQcmdZViewItem RE: L.E.D Flasher - 1300hayabusa - 08-05-2008 Busanthony Wrote:Anyone tried changing the relay plug to slow their LED Blinkers I reckon if you change your front indicator globes to led's the problem could be fixed due to the power being distributed equally.. RE: L.E.D Flasher - Louwai - 08-05-2008 Check out the Indicators post in the DIY section & scroll down to ADDITIONAL INFO #3 May help. RE: L.E.D Flasher - Busanthony - 08-05-2008 Louwai Wrote:Check out the Indicators post in the DIY section & scroll down to ADDITIONAL INFO #3 i checked this out (THANK YOU) but what is a "a two pole “electro-mechanical†flasher unit" where do i get it &what are they worth? RE: L.E.D Flasher - ROD - 08-05-2008 Quote:I reckon if you change your front indicator globes to led's the problem could be fixed due to the power being distributed equally.. No want fix the problem indicators work on a current to let you no that you have one not working they will flash faster so the only way to fix is to replace with a non current sensitive relay |