brake bar extensions - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Turbo Talk (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=41) +--- Thread: brake bar extensions (/showthread.php?tid=9189)

brake bar extensions - XXX - 08-02-2008 ok turbo guys i have finally gone and put a 4" over arm on my bike now i need a simple fix for the brake bar that doesnt reach show me some pics of what you guys have done RE: brake bar extensions - Maj - 09-02-2008 Bill one bike i cut and shut 2 links to the right length, before that a piece of 13mm rhs as a extension on the link. other bike a block of aluminium that mounts to the caliper mount bolts and fits neatly against the underside of the swingarm.only works if the swingarm is level on the underside of the billet end . RE: brake bar extensions - BLACKZOOK - 09-02-2008 A piece of alloy and half an hour with the vice/drill/sander. First make a thin template to get holes and angle right. If you make it the right length it still allows a couple of inches of wheelbase adjustment. In the pile for chroming RE: brake bar extensions - BUSGO - 09-02-2008 Rear brakes are for Pussies.... (Unless you have a corner approaching) Yes, it is another wet day here and I'm bored.. RE: brake bar extensions - AntsBuza - 09-02-2008 XXX I have one sitting somewhere in my garage. It's a billet piece bolts to your existing brake bar and has the U loop on the other to bolt to your swingarm. I used it whith my 4" extensions, worked o.k. If you want it's yours. as long as i can find it. RE: brake bar extensions - Macbusa - 09-02-2008 what you need is this ... it eliminates the brake bar... got this for my +6" swingarm notice the big solid notch RE: brake bar extensions - XXX - 10-02-2008 Grant thats a good looking piece now the question is are you going to use your 6 inch arm if not I know someone that is very keen to talk to you Mr Ants thanks for the offer but I needed a ride today so i jimmied one up last night i reckon it looks good and it does the job too