+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Turbo Talk (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=41)
+--- Thread: Fuel Pump ?? Bosch 044 (/showthread.php?tid=8223)
Fuel Pump ?? Bosch 044 - AntsBuza - 01-10-2007
Time to get a fuel pump . is the Bosch 044 pump the correct size rated at 700hp.
Nearly finished the headers pics soon.
RE: Fuel Pump ?? Bosch 044 - TheShredder - 01-10-2007
Yep
RE: Fuel Pump ?? Bosch 044 - Maj - 01-10-2007
I use a 910 for higher pressure fmu stuff and a 044 for higher flow & lower pressure secondary setups.
RE: Fuel Pump ?? Bosch 044 - Legend - 02-10-2007
The big pumps circulate the fuel quite quickly, and heat the fuel.
Something to keep in mind.
Leonard.
RE: Fuel Pump ?? Bosch 044 - borgy - 03-10-2007
This is the pump i Used on Alex's bike....... Bosch pumps are very accurate and fiddly pumps........We have had these pumps only last 5min and others last a whole year and still flow correct after a check up..... Def use a suction filter before it........ 044 in stock now for $350+...... I also sell the adaptors, tails, hose and all Turbosmart products and design complete systems...... Simon 0417 297 708
RE: Fuel Pump ?? Bosch 044 - AntsBuza - 03-10-2007
Thanks for the info guys.
RE: Fuel Pump ?? Bosch 044 - Geri - 08-10-2007
borgy Wrote:This is the pump i Used on Alex's bike....... Bosch pumps are very accurate and fiddly pumps........We have had these pumps only last 5min and others last a whole year and still flow correct after a check up..... Def use a suction filter before it........ 044 in stock now for $350+...... I also sell the adaptors, tails, hose and all Turbosmart products and design complete systems...... Simon 0417 297 708
Clamping them tight around the body with something like a large hose clip is a sure way of ruining a Bosch pump. They must be mounted with some kind of rubber padding and not squeezed too hard. I made a giant P-Clip from a spare Micron exhaust-band to mount mine.