+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1)
+--- Thread: Maj750t (/showthread.php?tid=5293)
Maj750t - Slong - 30-01-2004
I'm assuming that you're the same Maj750t as on the AzBikeTech forums?
If you are you can guess what I'm about to ask you about!
Just want to get some info on how you went about researching/building your own turbo.
Turbocharging fascinates me and I don't doubt that some time in my life [probably sooner rather than later] I'll make one up for the busa.
How did you go about picking the GT-28 as the right one, and how did you go about tuning it?
I'd love to catch up some time and checkout your install!
Jonheywood @ap.spherion.com [without the space]
Cheers,
Jon
homebuilt - Maj750t - 31-01-2004
Thats me .
Started with a 96 gsxr750 trying to blowthru carbs ,then converted to injection,used 5 different turbo's, burnt 1 piston,had a lot of fun and learnt something in the process .The 750 is a bit flighty at 12psi and the rods are not reliable for 200hp levels for long so i brought the busa .
I used the gt28 for its compact size ,this one is rated at ~300hp at 15psi ,it is a ball bearing type so it spools up quick .there are a lot of mitsubishi turbo's used on busa's but i'm not as farmiliar with them.