Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
Engine wouldn't crank over ? - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Engine wouldn't crank over ? (/showthread.php?tid=3306)



Engine wouldn't crank over ? - rev 01 - 19-09-2003

I wandered out to the garage intending to go for a quick run recently & had to can it due to no cranking action from the starter

The battery voltage was good & a quick check using my $3.50 circuit tester showed no circuit continuity through the clutch lever isolation switch with the lever in. After removal, I could see the contacts through what looks like a moisture drain hole on the underside of the switch & a quick clean with a small jewellers file & all was well, hoping the same doesn't happen to you & if it has I know you will commiserate <i></i>


All's well that ends well.... - peter altas - 23-09-2003

At least you're back on the road and you didn't need to pay some shmuck $40 and hour to find the fault
Peter Altas
BUSA-1<i></i>


Re: All's well that ends well.... - GDYUP - 23-09-2003

Had a similar probem recently Rev. Mine turned out to be a flat battery. Something to do with leaving the heated handgrips on me thinks. <i></i>


Re: All's well that ends well.... - rocket rod 7777 - 24-09-2003

You sure its not from not riding! <i></i>


hehehehehe.......... - kamakazebusa - 24-09-2003

<i></i>


Re: hehehehehe.......... - GDYUP - 24-09-2003

Your right Rocket man. I'm not riding at the moment.
Now I can be an official Australian Hayabusa Club Member just like the rest of you dreamers.
Cheers, Phil. Recovering not riding..... <i></i>


blat fattery - rev 01 - 24-09-2003

Yegads GDY sounds like you've got it hot wired direct I know I know (warm up time ) for those
0600 all frozen up starts !!

I reckon my nickel shares dividend payment is gonna go over the moon real soon (thanks cob)



<i></i>