+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Mechanic WA (/showthread.php?tid=23352)
Pages:
1
2
Mechanic WA - jgontran - 13-12-2016
Hey Guys, i'm looking for a mobile mechanic that knows about Busa as i think i've done some damage to No 3 and 4, could be a ring or could be just a gasket
Cheers, Jimmy
RE: Mechanic WA - Shordy - 14-12-2016
Hi mate,
I'm assuming you need a mobile mechanic so that they can come to you.
If it's for an engine tear down, I don't think you're going to find many people wanting to do that outside of their own workshop.
You may find it easier to just trailer it to a reputable mechanic.
As you're in WA, maybe one of the guys can suggest someone for you.
Hey camel.....feel like getting your mitts grubby?
RE: Mechanic WA - jgontran - 14-12-2016
Thanks mate, i wanted a mobile mechanic to come and do a compression test just to get an idea of what the damage could be. Got in touch with Camel yesterday, he's asked me to let him know the results of the test so we can decide what to do, hoping it's nothing too serious
RE: Mechanic WA - Batfink - 14-12-2016
Have you thought of buying your own compression tester?
Supercheap has them from about $40
RE: Mechanic WA - Huls - 14-12-2016
Derek Ball comes highly recommended on other sites such as PSB & ASB. 0438 926 511.
RE: Mechanic WA - jgontran - 14-12-2016
Never think about these things Batfink, its a mate of mine that's coming over to do it at no charge, once done will be in touch with the experts, lucky for me i have me other Busa to fall back on
RE: Mechanic WA - Hayabusabike - 14-12-2016
(14-12-2016, 01:55pm)jgontran Wrote: Never think about these things Batfink, its a mate of mine that's coming over to do it at no charge, once done will be in touch with the experts, lucky for me i have me other Busa to fall back on
99 red? Jimmy?
RE: Mechanic WA - jgontran - 20-12-2016
yes mate, it's me, has been a while since we last saw each other, thought you'd be on the teddy Bear ride couple weeks ago, Jimmy
Batfink, end up buying my own kit after all, did the compression yesterday and here are the results
No 1 75 PSI
No 2 75 PSI
No 3 48 PSI
No 4 75 PSI
Thoughts????
RE: Mechanic WA - Batfink - 20-12-2016
Are you sure you have the tester bedded corerctly as a Gen 2 (2008+) busa should be between 199-256 PSI with a max deviation of 28 PSI
RE: Mechanic WA - Batfink - 20-12-2016
Here is a link to my manuals... they have ALL the info you need
https://drive.google.com/open?id=0B67Bu6LstdIYVXVNWG40cmxQWVk
RE: Mechanic WA - jgontran - 20-12-2016
Batfink, mine is a GEN 1, i did srew it in properly, i might have a read through and give it another try, thanks for the info
Jimmy
RE: Mechanic WA - Batfink - 20-12-2016
there is a Gen 1 manual in that link too actually you will find the 1999/2000 manual + a 2001 & 2002 suppliment
the PSI for a Gen 1 is
171 - 228
lower limit of 128
max difference of 28
RE: Mechanic WA - jgontran - 20-12-2016
thanks mate
here's my thoughts atm
Rebuild my engine with either a 1398 or 1440 kit
Buy another 99 Busa with low kms and swap the engine
Buy just a 99 engine with low kms and do the swap
Thoughts????
RE: Mechanic WA - kev11e - 20-12-2016
G'day
My two bobs worth - looks like it could have had a gutful of dust, so what does the airfilter look like?
And what cost a short motor from Suzuki?
But hard to argue against 1398 or 1440....
RE: Mechanic WA - jgontran - 20-12-2016
Hey kevin, airfilter wasn't that dirty at all, funny that you're talking about dust, we went out the other day and somehow we end up on this dirt road which we thought was only going to be a short road but end up to be 65 kms long, the worse day of my life, Jimmy