+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bling Bling Sales Counter (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=36)
+--- Forum: Buy, Swap and Sell (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=17)
+--- Thread: Swap 02-07 PCIII for 01 (/showthread.php?tid=23094)
Swap 02-07 PCIII for 01 - ttooddddyy - 14-01-2016
I have a 02-07 power commander in excellent condition, would like to swap it for a 01 PC to suit my bike.
RE: Swap 02-07 PCIII for 01 - harky - 15-01-2016
RE: Swap 02-07 PCIII for 01 - ttooddddyy - 18-01-2016
RE: Swap 02-07 PCIII for 01 - harky - 18-01-2016
RE: Swap 02-07 PCIII for 01 - ttooddddyy - 20-01-2016
Thanks Harky. Turns out the 99-00 PC uses completely different connecting leads so can not be used in a 2001.
The the 2002-2007 version (that I have) has the same connectors and does seem to work on the bike, however there is a dedicated 2001 version, which is the one Im looking for.
RE: Swap 02-07 PCIII for 01 - playswithnitro - 23-01-2016
G'day,
My Busa is a 2001. It is fitted with a 2002-2007 ECU and rotor as well as a PC III for a 2001 model -- part number 320-411.
It works perfectly and has done since my Busa was all stock.
No need to change anything.
1999-2000 models had a unique wiring harness.
2001 to 2007 models all use the same wiring harness.
ECU
1999-2000 -- 8Bit ECU
2001 only -- 16Bit ECU
2002-2007 -- 32Bit ECU
RE: Swap 02-07 PCIII for 01 - ttooddddyy - 02-02-2016
(23-01-2016, 02:12pm)playswithnitro Wrote: G'day,
My Busa is a 2001. It is fitted with a 2002-2007 ECU and rotor as well as a PC III for a 2001 model -- part number 320-411.
It works perfectly and has done since my Busa was all stock.
No need to change anything.
1999-2000 models had a unique wiring harness.
2001 to 2007 models all use the same wiring harness.
ECU
1999-2000 -- 8Bit ECU
2001 only -- 16Bit ECU
2002-2007 -- 32Bit ECU
Thanks for the reply
My 2001 has standard ECU. Do you think the 2002-2007 PCIII will be OK in this bike. Ive connected it and it seems to work OK, but I do not want to screw anything up.