+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Shift Stalling at 5&6 (/showthread.php?tid=22779)
Pages:
1
2
Shift Stalling at 5&6 - Buzz - 13-06-2015
RE: Shift Stalling at 5&6 - Aussie Steve - 13-06-2015
I find my boots tend to interfere with some changes...just not pushing the lever firm enough. I may adjust the little rod to make it easier for the boot tip to get fully under the shifter....or I may just ignore it...or wear sandles/thongs LOL!
RE: Shift Stalling at 5&6 - Batfink - 13-06-2015
I agree with Steve as in have you adjusted foot levers to suit you? I had to drop the relative gear lever about 8mm in total to help stop false neutral between 5th and 6th... There is a slight increase in gear lever action as you go up in the gears but I put it mainly down to "lazy rider" syndrome lol meaning you are hitting cruise speed, bike is settled so your physical movements are more relaxed and less articulate.
Otherwise I wonder when was last service and how good is the oil cause old/thin oils can give gear change issues.
Hope this helps
RE: Shift Stalling at 5&6 - shorty - 14-06-2015
RE: Shift Stalling at 5&6 - Aussie Steve - 14-06-2015
I also find my gear changes are lazy when I'm busy doing other things....like texting or eating a whopper
RE: Shift Stalling at 5&6 - shorty - 14-06-2015
RE: Shift Stalling at 5&6 - Buzz - 15-06-2015
RE: Shift Stalling at 5&6 - shorty - 15-06-2015
RE: Shift Stalling at 5&6 - kozzo - 15-06-2015
What shorty said..push it harder than usual...use it and It will pass
RE: Shift Stalling at 5&6 - shorty - 15-06-2015
RE: Shift Stalling at 5&6 - Batfink - 16-06-2015
I'm happy to cruise around at 80 in 6th cause the bike has the torque... it's not like it's a litre bike or 600 LOL
RE: Shift Stalling at 5&6 - Shordy - 16-06-2015
A friend of mine rode my Gen 2 a couple of weeks ago.
He normally rides a '08 Gixxer 1000 and his only comment was "why has it got 6 gears".
He said "drop it in 3rd and just leave it there".
So true....
RE: Shift Stalling at 5&6 - DjPete - 16-06-2015
"The moderators should make this thread sticky so that we can address these issues properly"
With all that cheese I would have thought this thread would already be sticky.
:-)
RE: Shift Stalling at 5&6 - kozzo - 16-06-2015
RE: Shift Stalling at 5&6 - shorty - 16-06-2015