+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Tighten Head Steam Bearings? (/showthread.php?tid=22412)
Tighten Head Steam Bearings? - RaZ - 11-01-2015
RE: Tighten Head Steam Bearings? - RaZ - 11-01-2015
Shop jobby - dont have all the right tools for the job - plus - better to replce with roller bearings anyway ;)
RE: Tighten Head Steam Bearings? - Maj - 11-01-2015
If they are loose you will feel it with your left fingertips , put them sort of half on the frame and half on the collar that goes on top of the bearings, then grab the front brake with your right hand and rock the bike forward , you will feel what you cant see
if you think they are grooved you need to raise the front off the ground and slowly turn the bars and feel for tight /loose /tight sort of thing
RE: Tighten Head Steam Bearings? - RaZ - 13-01-2015