+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Gauges not working. Gen2 (/showthread.php?tid=22383)
Gauges not working. Gen2 - Ward P - 29-12-2014
RE: Gauges not working. Gen2 - Batfink - 29-12-2014
have you checked for line resistance in harness? might be a break in harness for the multi-display?
RE: Gauges not working. Gen2 - BikerBoy - 29-12-2014
Sounds like a fuse wardy. Check em first...as they're cheapest to replace anyway.
RE: Gauges not working. Gen2 - Maj - 30-12-2014
yeah one of the fuses does the gauges
Any of those fires getting close in the last few weeks Wardy
i heard Granya and Tallangatta mentioned a few times on the truck radio
RE: Gauges not working. Gen2 - Ward P - 30-12-2014
RE: Gauges not working. Gen2 - Maj - 30-12-2014
My chinese fairings had paint that was very soft and marked easy , so i put them on the east side of the house for a few weeks to harden
And damage in the accident could have caused a fuse to go, you may have replaced the offending item, already
RE: Gauges not working. Gen2 - Ward P - 31-12-2014
Thanks for the tip regarding paint.