+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Temp gauge question (/showthread.php?tid=22305)
Temp gauge question - creamy - 30-11-2014
I only noticed this the other day for the first time, but it may have been doing the same thing since new. When I turn the ignition on with the bike in gear the temp gauge needle moves straight to high and stays there. When I knock it out of gear or start it it is all ok. I'm just wondering if this is normal.
RE: Temp gauge question - Aussie Steve - 30-11-2014
I think the start up process is incomplete whilst in gear...you will have a check showing in the GP indicator....well I do when I do that.
RE: Temp gauge question - BikerBoy - 01-12-2014
Yes it's normal.....as I found out on a 36 degree day at the shops thinking my new Busa had overheated.
Waited 2 hours in a stinking hot car park only to figure out....the temp gauge goes straight to red with key on.
RE: Temp gauge question - creamy - 01-12-2014