Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
Powerseal USA - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Powerseal USA (/showthread.php?tid=22060)



Powerseal USA - Zoro - 04-09-2014

Might need to get a Nikasil cylinder replated.
Has anyone here used them?
http://www.powersealusa.com
Or, is there a local mob with a good rep that people use here?


RE: Powerseal USA - Shifu - 04-09-2014

From memory Maj was using someone on his bored out block last year or so. Not sure who and it could even be the same mob though. Best shoot him a message.


RE: Powerseal USA - Maj - 05-09-2014

Millenium http://www.mt-llc.com/

If you have a damaged stock cylinder just buy a s/h one , its way cheaper and there not something that wears out easy , they typically go for a couple of hundred for a gen 2 and 300 or so for a gen 1


gen 2 cyl are fine on a gen 1 or 2 as long as your not boring it ,


RE: Powerseal USA - Zoro - 05-09-2014

Cheers guys