+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: HELP and Gen 1 bits wtb. (/showthread.php?tid=22050)
HELP and Gen 1 bits wtb. - Buhjones - 03-09-2014
Hi all. I have just spoken to my mechanic and the news is bad. Stator cover has a hole in it and no wreckers have any. Also the fuel pressure reg and the fuel pump seem to have sh@ themselves.
Any idea what I should do? Aftermarket fuel pump?
Thanks muchly in advance.
RE: HELP and Gen 1 bits wtb. - pan - 03-09-2014
Hi. I have a re-conditioned Gen 1 (1999, external) pump. Cost me $150, but never used it.
Let me know if it's cost effective, compared to buying after-market pumps...
RE: HELP and Gen 1 bits wtb. - Driller - 03-09-2014
If your sator is ok and if your concerned about price just throw a cheap cover from china on there's plenty on ebay a slider is a good investment to
RE: HELP and Gen 1 bits wtb. - Dennis - 03-09-2014
Replaced my stator with a Woodcraft after dropping it on the side in my shed. Bit of paint scratched of but ok otherwise. Yours if u want it. PM me a mailing address. Dennis
RE: HELP and Gen 1 bits wtb. - Buhjones - 04-09-2014
As always the bus club comes to the rescue. You guys rock.
Mechanic dismantled the pump and cleared 15 years worth of grit and possums from the filters.
Have scoped the cheap chinese covers (like the cracked one currently on there) and it looks like $50 well spent.
Thanks guys.
"yayayayayayay, busa day, la la la la la yay!"