Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
transmission undercutting - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: transmission undercutting (/showthread.php?tid=21561)

transmission undercutting - Grizzly - 09-04-2014

hi all, does anyone know where i could get a Hayabusa transmission undercut here in Australia?? found a few oversea's but the freight cost kills it. cheers

RE: transmission undercutting - Maj - 09-04-2014

Joe Marshall would be the closest to you

RE: transmission undercutting - Grizzly - 10-04-2014

thanks Maj, does he run a bussiness in QLD?

RE: transmission undercutting - TheShredder - 10-04-2014

Pretty sure hes given up working on
Other people's bikes now but you could try

RE: transmission undercutting - Dan85 - 10-04-2014

I think there is a guy in Ayr that does it mate. Give dave at burdekin bikes a call he should be able to help you out with a name.

RE: transmission undercutting - Camel - 13-04-2014

I've got a guy here in Perth with all the necessary jigs.

RE: transmission undercutting - Banter - 13-04-2014

(09-04-2014, 08:18am)Grizzly Wrote: hi all, does anyone know where i could get a Hayabusa transmission undercut here in Australia?? found a few oversea's but the freight cost kills it. cheers
Try PTR, http://www.ptr.com.au/suzuki-gsx-1300r-hayabusa.html?limit=all they have been around a long time and although there Vic based they may know some one local in QLD who can help. A few years a ago I looked into this after throwing 2nd gear on my 2004, its seems tooling up to do the work just isn't worth it for our small market unlike the US, hopefully thinks have changed. Good Luck.

RE: transmission undercutting - Maj - 14-04-2014

Dunno if he is still operating but Bruce Woodley at Powerflow motorcycle engineering did my race bike
he is based near Geelong in Vic