All Rubber Lines Go - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5) +--- Thread: All Rubber Lines Go (/showthread.php?tid=21152)

All Rubber Lines Go - dad1300 - 17-11-2013 Greetings Lad's, The upgrade on the Bus progresses including getting rid of all Rubber Lines. A question; brakes are done and now it's the clutch. I found a short rubber hydraulic line connected to a pipe near the headstock. The Fairings still on so has anyone taken off the pipework to replace with full Braided Line? If so, is there plenty of room for the Braided Line? Cheers and stay dry (a change from battling bushfires) dad1300 RE: All Rubber Lines Go - pashnit - 18-11-2013 Plenty of room, a very common mod. Just take that stock line off. Braided line installs just like the brake. Replace, bleed, done. RE: All Rubber Lines Go - Tony Nitrous - 18-11-2013 RE: All Rubber Lines Go - dad1300 - 18-11-2013 [quote='pashnit' pid='291949' dateline='1384702413'] Plenty of room, a very common mod. Just take that stock line off. Braided line installs just like the brake. Replace, bleed, done. Wow, I'm embarassed now. Thanks for the great info with "a picture is worth a thousand words" approach. Sorry for such a dumb question mate. Just a lazy question with reasons. I discover more each day of this amazing roadster. QEM, SFM and PC-5 to go (and a bit more) Kind Regards dad RE: All Rubber Lines Go - GRUNTMAX - 21-11-2013 www.jegs.com