+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: What rpm should i change at ? (stock busa drag racing) (/showthread.php?tid=21027)
What rpm should i change at ? (stock busa drag racing) - Harry hyper - 14-10-2013
i have a 2012 stock busa , nothing done at all . i had a run a little while ago and got a 10.218 . as i`m not that experienced with drag racing and a lot going on (for me) i changed gear more by feel than concerntrating on the tacho . i did have a gopro on the tank and i was changing around 10500/10750 rpm . the question i ask is , does anyone have a dyno of a stock busa and let me know if i should maybe change a bit earlier to be in the sweet spot ? if you know what i mean ??? i would love to get the thing dyno`d myself and get a few things done to her , but as one is currently building a house at the moment the bucks are a little stretched . any feedback would be greatly appreciated ?
matt
RE: What rpm should i change at ? (stock busa drag racing) - pan - 14-10-2013
10.2 sounds like you're launching well and shifting just right. Keep practicing those 60 foot times, get them below 1.7 and you'll be well into the 9's
RE: What rpm should i change at ? (stock busa drag racing) - Axe - 14-10-2013
yea 10.2 sounds pretty good for a stock bike... clutch...
Matt,
Need any help 'tweeking' the bike, give we a yell.
Was thinking of booking out the drags for a day, prob jan/feb... ill let you know and you can come have a practice day.
Axe
RE: What rpm should i change at ? (stock busa drag racing) - Harry hyper - 15-10-2013
(14-10-2013, 06:55am)pan Wrote: 10.2 sounds like you're launching well and shifting just right. Keep practicing those 60 foot times, get them below 1.7 and you'll be well into the 9's
thanks pan , i would love to get a 9 . i think i just need more time practicing . also just trying to work out any advantage .
(14-10-2013, 12:19pm)Axe Wrote: yea 10.2 sounds pretty good for a stock bike... clutch...
Matt,
Need any help 'tweeking' the bike, give we a yell.
Was thinking of booking out the drags for a day, prob jan/feb... ill let you know and you can come have a practice day.
Axe
Axe i`m keen if your going to book the track , let me know . i find it hard to find the time on Wednesdays and i need a heap of practice . i noticed you mentioned CLUTCH !!! , what do stock clutch`s go like ??? I've wondered about my clutch and i try not to let it ride too much . I've always preferred let my clutch out as far as possible before the gas goes on . but how do they hold up ???
matt
RE: What rpm should i change at ? (stock busa drag racing) - Axe - 16-10-2013
the std clutch has a type of back torque limiter... personally i think its rubbish, some maybe have different opinions, but getting rite of that i think gives a much better and more direct feel.
clutch out before really gassing it, is perfect. that way you preserve it..
hopefully jan/feb, we'll get the track for a day just to play....
:)
RE: What rpm should i change at ? (stock busa drag racing) - Dan85 - 18-10-2013
let me know ill come watch!
RE: What rpm should i change at ? (stock busa drag racing) - Axe - 18-10-2013
you can run too if your interested.