+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Fi code help... (/showthread.php?tid=19138)
Fi code help... - John - 22-06-2012
Had the bike stop and the FI light come on whilst riding. The light is not on now, i pulled the clutch in an released it an the bike started again. I have read how to see what sensor was tripped, but I want to know if there is someone in Sydney that can SHOW me how?
RE: Fi code help... - Greeny_SA - 22-06-2012
(22-06-2012, 02:32pm)John Wrote: Had the bike stop and the FI light come on whilst riding. The light is not on now, i pulled the clutch in an released it an the bike started again. I have read how to see what sensor was tripped, but I want to know if there is someone in Sydney that can SHOW me how?
Clutch lever micro switch ? ,or is that too obvious .
RE: Fi code help... - Maj - 22-06-2012
can only read it manually while the fi is active , otherwise you need the sds tool to read stored faults
if the bike stopped when the fi came on it probably something simple or you would not have started it again , go over your battery terminals
check your sidestand switch and be sure it has to move a reasonable distance before deactivating