+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Pete's Pit Stop = 10/10! (/showthread.php?tid=19099)
Pete's Pit Stop = 10/10! - Troppo - 13-06-2012
Hello all,
I sent my ECU to Pete for flashing.
It was back within the week.
All the limiters are removed, and it is mapped for my R77 slip ons.
The difference is amazing.
The bike is mega smooth off idle - no glitches off a closed throttle, no dips in the power curve - just a relentless tidal wave of torque.
I also did the PAIR valve block off mod - marble in the hose, as recommended by Pete.
No pops or bangs on deceleration now, at all.
If any of you have not had your ECU flashed - do it!
I heartily recommend Pete.
A 1st class job.
RE: Pete's Pit Stop = 10/10! - RyanG - 13-06-2012
Sounds good... What's it cost?
RE: Pete's Pit Stop = 10/10! - Heidi1 - 13-06-2012
He is a good chap that one ;)
RE: Pete's Pit Stop = 10/10! - Troppo - 13-06-2012
It costs about half the cost of a power commander.
And, you do not need a TRE to remove the limiters in 1st, 2nd and 3rd - it is all done in the ECU.
This is the best bang for your buck mod you can do for the Busa.
RE: Pete's Pit Stop = 10/10! - RyanG - 13-06-2012
So what's a power commander worth lol
RE: Pete's Pit Stop = 10/10! - BEAU - 13-06-2012
And as I understand, the pair system can be just turned off yes? No need to block it up Pete? Or do you suggest this also, as well as the ECU turn off?
Oh yeah, go Pete! His work speaks for itself. And if you haven't, you have no idea what your missing...really...
RE: Pete's Pit Stop = 10/10! - Troppo - 14-06-2012
Pete turns the pair system off, but you still need to do the marble mod.
RE: Pete's Pit Stop = 10/10! - molly - 14-06-2012
I here is the man.
RE: Pete's Pit Stop = 10/10! - ROD - 14-06-2012
10/10 Not for his looks
My ecu will be on the way soon not sure with or without the bike
RE: Pete's Pit Stop = 10/10! - Steve46 - 16-06-2012
Yep Petes the man, he flashed & dynoed mine never been happier.
RE: Pete's Pit Stop = 10/10! - John - 22-06-2012
Got mine done last year, rode up from Sydney. The ride back was a lot better. Highly recommend.
RE: Pete's Pit Stop = 10/10! - the goat - 17-07-2012
I am constantly
amazed that blondes get such a bad rap!
RE: Pete's Pit Stop = 10/10! - Madmax - 19-07-2012
Pete is a rare sourse of mechanical brilliance. 11 out of 10 to him!!!
Max