![]() |
New Inner Fork Tube $$$$$$$$$$$$ - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5) +--- Thread: New Inner Fork Tube $$$$$$$$$$$$ (/showthread.php?tid=18549) Pages:
1
2
|
New Inner Fork Tube $$$$$$$$$$$$ - Busdriver - 27-01-2012 I've had some crap get up inside the dust seal and this crap has caused the fork seal to start leaking and has also scratched the fork tube. You can catch a finger nail in it. Spoke to Suzuki in Canberra today. $927.49 for a new inner fork tube, but they now only come in black and mine are gold. So I would need to get both the left and right inner tubes so my bike don't look shit. $1855.00 ![]() ![]() Only $1269 to get 2 of them shipped in from the US. ![]() I think I have caught it early enough that the scratching will be able to be polished out and with a good clean up, new seals, etc I might have saved myself a shit load of money. RE: New Inner Fork Tube $$$$$$$$$$$$ - Maj - 27-01-2012 Why not get a set of 08+ forks and brakes for half that on US ebay RE: New Inner Fork Tube $$$$$$$$$$$$ - Busdriver - 27-01-2012 I did think of that, or putting the complete Ohlins K8+ forks in. But considering the internals in my forks have been upgraded for my weight, I have just put new brakes etc on my K6, and I may be able to save my current fork leg. RE: New Inner Fork Tube $$$$$$$$$$$$ - TheShredder - 27-01-2012 Hey Les what about sending them in to get polished & have the nitride coating reapplied ? shane RE: New Inner Fork Tube $$$$$$$$$$$$ - Busdriver - 27-01-2012 Hey Shredder, where do you get that done? RE: New Inner Fork Tube $$$$$$$$$$$$ - TheShredder - 27-01-2012 use to be adds in AMCN in the back havent had it done myself but a set of forks on 1 of my busa's had it done by Neals Machining in Qld RE: New Inner Fork Tube $$$$$$$$$$$$ - Tony Nitrous - 27-01-2012 I've been looking at Gen2 front ends on US Ebay. Less than your price for a single fork tube. Few ASF guys have bought complete US front ends. RE: New Inner Fork Tube $$$$$$$$$$$$ - Shifu - 27-01-2012 I am really surprised that someone would buy the parts at their local Suzuki dearer ![]() There are few complete sets of brand new OEM front forks with bottom tripple clamp and steering damper for $450 the lot ![]() ![]() Got it on my watch list if you need a link let me know. Cheers, RE: New Inner Fork Tube $$$$$$$$$$$$ - Maj - 28-01-2012 You could put your 06 upgraded springs in the later forks RE: New Inner Fork Tube $$$$$$$$$$$$ - Busdriver - 28-01-2012 After looking at the Gen2 front ends on eBay, I would also need to get Gen2 calipers, disks, pads. These items need also to be factored in. Maybe it's time to just sell mine for parts. RE: New Inner Fork Tube $$$$$$$$$$$$ - Busdriver - 28-01-2012 (27-01-2012, 11:29pm)Shifu Wrote: I am really surprised that someone would buy the parts at their local Suzuki dearer Would never buy them locally at that price. RE: New Inner Fork Tube $$$$$$$$$$$$ - Tony Nitrous - 28-01-2012 I think thats going to be the way I go..... http://motors.shop.ebay.com/i.html?_nkw=Hayabusa+forks&_sacat=10063&Part%2520By%2520Region=Asian&_dmpt=Motorcycles_Parts_Accessories&_odkw=Hayabusa+fork&_osacat=10063&bkBtn=&_trksid=p4506.m270.l1313 I see some of the "fat arse" big tyre companys in the US always have plenty of Busa rear wheels cheap too. RE: New Inner Fork Tube $$$$$$$$$$$$ - Axe - 28-01-2012 I have a set of forks I mite be looking at getting rit of soon? Off an 06 Resprung for100+kg and ohlins oil! Won't know foresure for another week though! Ifit helps! RE: New Inner Fork Tube $$$$$$$$$$$$ - BLACKZOOK - 28-01-2012 (28-01-2012, 05:31pm)Axe Wrote: Resprung for100+kg and ohlins oil! lol RE: New Inner Fork Tube $$$$$$$$$$$$ - Axe - 29-01-2012 haha Yes I'm a little heavier then the intended Japanese rider.... |