+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Track Days / Drag Racing (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=6)
+--- Thread: Sprocket Ratios (/showthread.php?tid=1747)
Sprocket Ratios - BEAR - 23-08-2006
What's the recommended for drag racing?? Std bike! <i></i>
Re: Sprocket Ratios - simmo - 23-08-2006
I run 17 - 43
I would like to change to 17 - 42 for a try soon
Cheers Robert
Aren't all Busas Copper & Plated, the others are just all very poor slow ugly copies !!!!!<i></i>
Re: Sprocket Ratios - pan - 23-08-2006
Hi Ian. I ran 17-43 and had trouble keeping the nose down. I still prefer stock, though you will obviously get better acceleration with lower gearing IF (unlike me) you know how to launch properly.
Leonard runs a 16 in the front and he manages 9.7 on a stock (lowered) bike...
Hmmm, just had a thought that could help you both go faster... Maybe you two should paint your bikes RED!
"sometimes crime does pay"<i></i>
Re: Sprocket Ratios - BEAR - 23-08-2006
Thanks guys, I got two back sprockets with the bike, so will check teeth numbers (one was stock) and see what to do about the front.
Why would you take a non red 9.7 sec bike and paint it red? It would go slower based on your time wouldn't it? <i></i>
Re: Sprocket Ratios - Blackzook - 23-08-2006
16-42 great launches at the track and fun on the road as well . This gearing will get you over the line just before the limiter in 4th. Same as Leonard uses. Bruce
N2O no laughing matter
<i></i>
Re: Sprocket Ratios - simmo - 28-08-2006
Where can I grab hold of a 42 tooth Bruce
Cheers Robert
Aren't all Busas Copper & Plated, the others are just all very poor slow ugly copies !!!!!<i></i>
Re: Sprocket Ratios - PING BEAR - pan - 29-08-2006
Shouldn't have to count the teeth... usually a number etched on the side of the sprocket.
Simmo, look in Leonard's trailer while he's out racing on the track...!
"sometimes crime does pay"<i></i>
Re: Sprocket Ratios - PING BEAR - CAS3234 - 29-08-2006
Simmo, you get one from your Suzuki dealer, they are only about $30. I think Metro's sell new ones still and they are cheaper again.
<i></i>
Re: Sprocket Ratios - PING BEAR - simmo - 29-08-2006
Thanks Dav, I have tryed else where with no luck
I see if I can get 1/2 a day off to line up in Western's spare parts line
Cheers Robert
Aren't all Busas Copper & Plated, the others are just all very poor slow ugly copies !!!!!<i></i>
Re: Sprocket Ratios - PING BEAR - BEAR - 30-08-2006
I've got 17 and a 41 and a 42. So I'll run the 42 for now. The local Suzuki guy can get me a new sprocket at a good price, so maybe I'll get a 16 later. <i></i>
Re: Sprocket Ratios - PING BEAR - CAS3234 - 30-08-2006
Simmo, I have a 16 front that I dont use anymore, do you want to give that a go with your 43 rear?
You wont have to line up for it, just drop by my place after work. <i></i>
Re: Sprocket Ratios - PING BEAR - simmo - 30-08-2006
Thanks anyway Cas I pick up a 42 from Westerns, bring on the 9's
Cheers Robert
Aren't all Busas Copper & Plated, the others are just all very poor slow ugly copies !!!!!<i></i>