raising bars - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5) +--- Thread: raising bars (/showthread.php?tid=17146) |
raising bars - londonrage - 02-05-2011 can anyone help..l want to raise my bars due to a shoulder injury...any advise or help or where l can get raisers for my 2005 busa.... thanks heaps david RE: raising bars - CeeJay07 - 02-05-2011 Get in touch with Kawasuki (Ray) on the forum....pretty sure he sells Helibars...or check out his website easyriderimports RE: raising bars - Rainbow7 - 02-05-2011 Helibars are generally regarded as the best thing on the market. I use a Soupy's riser myself, but I am going to switch over to a set of Helibars, now that the dollar is so much more in our favour. http://www.soupysperformance.com/catalog/item/4408900/6637181.htm http://cgi.ebay.com.au/Suzuki-Hayabusa-Helibars-Heli-1999-2007-Clipon-Busa-Bar-/120718045276?pt=Motorcycles_Parts_Accessories&hash=item1c1b5b305c#ht_1689wt_905 RE: raising bars - Belzybob - 02-05-2011 With that thread title I'm suprised nobody has mentioned Cialis/Viagra yet RE: raising bars - grumpy - 03-05-2011 hi. give www spoiledbiker.com a try they are an american site for heli-bars. i brought mine in from them and at the time i landed them here to new zealand cheaper than i could buy them in australia and when you can save money its extra money you can spend on the bike. i love the heli-bars takes alot of you weight off your wraists. hope this is of some help. RE: raising bars - DAVE01 - 03-05-2011 are helibars wider than standard bars ? RE: raising bars - Troppo - 03-05-2011 Yes, they are - by about 10mm, from memory. RE: raising bars - DAVE01 - 03-05-2011 (03-05-2011, 10:01pm)Troppo Wrote: Yes, they are - by about 10mm, from memory.Thanks I find the bars width to be more of a problem on the boreing bits than the height,I have run with and without the bar risers and it doesn't make much diference to me but I do find myself holding the bar ends to relax. |