Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
PC maps 99' - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: PC maps 99' (/showthread.php?tid=17118)



PC maps 99' - FastPhil - 27-04-2011

I've got a 99' with staintunes, the small air box mod and K&N filter, tre, looking for maps. I tuned it myself by trial and error on the old pc2 but a bit rough down low, took it to the local dyno tune place, they said the pc2 was broken as they couldn't tune it properly down low,$$$$$. So I bought a new pc3 $$$$ I take it back with similar results $$$$$ just a bit smoother down low so I put up with it. I take it back for a service$$$$$$ pick it up ride it home almost unridable power on of on of , dangerous, take it back to shop, throttle sensor stuffed $$$$$$ have that fixed $$$$$. It had been dynode to the pc3 with stuffed sensor so now pc3 is diconnected as it is unridable when connected due to the tune. The bloke trained on the dyno has left and there is nobody who can use it now so I'll do it again myself, so any maps out there I can start with? I have already downloaded the ones from th PC site, what do you think?

Fast


RE: PC maps 99' - Champs - 27-04-2011

Get it to fasterfaster and stop bleeding all the $$$$. He will sort it for you I'm sure.


RE: PC maps 99' - fasterfaster - 27-04-2011

Phil send me a pm with your email address and I'll send you a map for the PC111 ................... no guarantee that it will be spot on but certianly much better that downloading from Dynojet as they are all US based maps. If you still have any probs after loading it then I would suspect you have another issue somewhere in the bike
Cheers


RE: PC maps 99' - FastPhil - 27-04-2011

(27-04-2011, 11:23am)fasterfaster Wrote: Phil send me a pm with your email address and I'll send you a map for the PC111 ................... no guarantee that it will be spot on but certianly much better that downloading from Dynojet as they are all US based maps. If you still have any probs after loading it then I would suspect you have another issue somewhere in the bike
Cheers

pm sent thanks


RE: PC maps 99' - FastPhil - 28-04-2011

Many thanks to Pete for sending me a map that makes my bike go like a ROCKET! Never gone better, thanks mate.

Fast