+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: front sprocket (/showthread.php?tid=15938)
front sprocket - intimidator - 05-10-2010
i own a 07 bus... and will be changing the chain and sprockets soon. I have previously had the fairing etc off and looked at my front sprocket.. and was just wondering if i needed a special tool to get it off... thanks
RE: front sprocket - Axe - 05-10-2010
http://www.youtube.com/watch?v=SouURDnPbQ0&feature=channel
All pretty easy mate.... just go slow and think...
piss easy.
Where abouts are you?
RE: front sprocket - Volvi - 06-10-2010
good video. I had probs trying to loosen the front sproc bolt, but silly me didnt know that trick of locking the rear wheel with a rod. in the end had to get into workshop who removed nut with air hammer socket. good luck, let us know how you went.
ps. if i remember correctly socket was size 32.
RE: front sprocket - Throwdown! - 10-10-2010
Excellent! I'll be doing my own now... once I find part 2.
RE: front sprocket - Timmy_0_T00l - 10-10-2010
not sure what size the Gen 1s use but i know that the gen 2s need a 36mm socket, and for a socket and wrench large enough for it cost me $70 from memory and both parts are Kingchrome too
RE: front sprocket - Madmax - 13-10-2010
If you search youtube for the original you'll find the part 2 mentioned and listed.
Cheers