Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
first service advice - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: first service advice (/showthread.php?tid=15384)



first service advice - Bryan Sergio - 15-07-2010

i'am taking my bike in for it's service soon..
can someone give me advice on what oil i should ask for....\
And anything esle i should be asking them to do
or anything i should be asking for
Cheers


RE: first service advice - [UNIT] - 15-07-2010

Make sure they check general nuts and bolts. My bike lost a couple of fairing bolts before 1000km


RE: first service advice - Rainbow7 - 15-07-2010

Check it after the service: they always, always, always lose a couple of the plastic fairing inserts, e.g. the two spots above the front forks, in front of the radiator.


RE: first service advice - Bryan Sergio - 16-07-2010

(15-07-2010, 08:54pm)Rainbow7 Wrote: Check it after the service: they always, always, always lose a couple of the plastic fairing inserts, e.g. the two spots above the front forks, in front of the radiator.

thanks boys appreciate the advice cheers


RE: first service advice - Landmine - 16-07-2010

Hi Bryan Sergio, Happy riding get a paint stick and mark oil filter to see its changed. Just a dot or line through fairing is all that's needed.


RE: first service advice - CeeJay07 - 16-07-2010

That's a great tip Landmine....never thought of that one!


RE: first service advice - Throwdown! - 17-07-2010

Full synthetic? Semi syn? Lots of different opinions out there as to when you can start using it.. or even if you should.

I've used them all and have settled on semi syn, but I'd say use what you like and change it when it gets dirty (choose your dirty between 2,500 to 5,000, depending on quality of oil).


RE: first service advice - Bryan Sergio - 18-07-2010

(16-07-2010, 10:03pm)Landmine Wrote: Hi Bryan Sergio, Happy riding get a paint stick and mark oil filter to see its changed. Just a dot or line through fairing is all that's needed.

Thankyou for that
(17-07-2010, 12:47pm)Throwdown! Wrote: Full synthetic? Semi syn? Lots of different opinions out there as to when you can start using it.. or even if you should.

I've used them all and have settled on semi syn, but I'd say use what you like and change it when it gets dirty (choose your dirty between 2,500 to 5,000, depending on quality of oil).

thanks throwdown