Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
Condensation on speedo lens - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Condensation on speedo lens (/showthread.php?tid=15371)



Condensation on speedo lens - Aussie Steve - 14-07-2010

I took the Busa for a spin...great... but noticed when the sun was shining on the speedo what appears to be condensation on the inside of the lens. I use the word condensation but it does not act like that...ie it doesn't collect in one big droplet and then slide down to the bottom...its almost as though it is a sticky substance. I am sure it wasn't there when I picked the bike up and it is under the weedy warranty they give for a used machine. Just wondered if anyone here had had a similar incident and if so how it can be fixed...not too happy leaving my bike with any dealer.

Cheers

Steve


RE: Condensation on speedo lens - Aussie Steve - 14-07-2010

Ok tried editing but that won't work after 15mins so here goes....I have the manual and from what I can see the lens and top come off without any real problem so out I go to see if I can fck it up!...hahaha!


RE: Condensation on speedo lens - 1300hayabusa - 15-07-2010

so out I go to see if I can fck it up!...hahaha!
[/quote]
good one steve Lol2Lol2Lol2


RE: Condensation on speedo lens - Cam - 15-08-2010




RE: Condensation on speedo lens - CeeJay07 - 15-08-2010

Someone used the word "anal" in a post and Bazman hasn't said a word! Can someone duck around to his place to make sure he's OK?


RE: Condensation on speedo lens - Madmax - 15-08-2010

Pretty easy to get the instruments out, the lens comes off when you take the 6 or 7 self tapping screws out of the back. There is an "O" ring goes between the guages and the backing. Mine leaks a little like that but I have Illumiglow faces and have had to alter the backing a little. It goes away eventually so don't worry about it too much - or worry your head off and get inside to dry it out. Can't hurt and certainly not hard to do.


Cheers


Max