+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Hayabusa Exhausts (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=11)
+--- Thread: Full systems 4-2-1 (/showthread.php?tid=14965)
Pages:
1
2
Full systems 4-2-1 - 09Fatboy - 02-05-2010
Guys , any recommendations for a full system ? good prices on Yoshi atm . Got offered a ti force 380 at a good price too.
No really chasing HP just less weight and ideally more torque.
Also anyone used ohlins falks on a gen 2 ,do they make a big difference in handling ?
Any advice appreciated .
RE: Full systems 4-2-1 - Bill Gaheer - 02-05-2010
Try US ebay.....if you are not chasing a brand then you should find decent options.
RE: Full systems 4-2-1 - Axe - 02-05-2010
I got a full Akropovic system off ...... wait for it... Amazon.com...
Full race system, 4-2-1, and it was only $1100...
Any shop in Aus will charge close to 3k...
I've always be a fan of Akro, and I massively happy with it...
http://www.youtube.com/watch?v=ldsD78zBu5c
RE: Full systems 4-2-1 - bigfoot - 03-05-2010
very nice mate looks and sounds awesome!
RE: Full systems 4-2-1 - Axe - 03-05-2010
Yea I'm pretty happy....
Well soon will be, have a few more thing to do to her first...
RE: Full systems 4-2-1 - Cb Boy - 03-05-2010
Axe...
You've got that bike looking mighty fine...
That full system sounds great...much deeper note than the twin Yoshi slipons I have on mine.
Loved your comment on the non cut Oggy knobs
How do you find the light weight bar ends...do you get much hand tingling?
RE: Full systems 4-2-1 - 09Fatboy - 03-05-2010
cheers guys , nice setup Axe , i was a blokes house today on the central coast picking up a some gen 2 bits and pieces and he had the same Akropovic system on a k10 , sounded bloody awesome.
RE: Full systems 4-2-1 - Axe - 03-05-2010
(03-05-2010, 10:07am)Cb Boy Wrote: Axe...
You've got that bike looking mighty fine...
That full system sounds great...much deeper note than the twin Yoshi slipons I have on mine.
Loved your comment on the non cut Oggy knobs
How do you find the light weight bar ends...do you get much hand tingling?
hahaha cheers mate...
The bar ends are from Voltermoto, same as the Rearsets.... just aluminum with gold over the top....
No chatter or tingling or anything!!
Very soon shes getting a GSX-R 1000 rear end, and plastics,
changing the gearing this weekend, 1 tooth down on the front for starters,
Braided lined and wave rotors going on soon,
hmmm
a TRE and PC5 are comming....
and still tossing up weather or not to get a set of BST Carbon Fiber Wheels Rims...
then I think that'll do....
maybe...
Ash.
RE: Full systems 4-2-1 - CeeJay07 - 04-05-2010
Nice bike Axe.....can you just tell me again.....how easy were the no-cut crash knobs to instal??hahahahahaha!!!
RE: Full systems 4-2-1 - Axe - 04-05-2010
(04-05-2010, 08:10am)CeeJay07 Wrote: Nice bike Axe.....can you just tell me again.....how easy were the no-cut crash knobs to instal??hahahahahaha!!!
hahahahahahaha
RE: Full systems 4-2-1 - Rainbow7 - 04-05-2010
"MalterVoto" rearsets?
RE: Full systems 4-2-1 - Axe - 04-05-2010
Voltermoto!!
RE: Full systems 4-2-1 - Rainbow7 - 04-05-2010
(04-05-2010, 01:26pm)Axe Wrote: Voltermoto!!That's not what you said...
Also, get yourself a set of the short Pazzo levers from BGW. - They look sweet and won't break if you drop it.
RE: Full systems 4-2-1 - Axe - 04-05-2010
(04-05-2010, 01:28pm)Rainbow7 Wrote:(04-05-2010, 01:26pm)Axe Wrote: Voltermoto!!That's not what you said...
Also, get yourself a set of the short Pazzo levers from BGW. - They look sweet and won't break if you drop it.
hhaha I just watched it again, and yea your right, I said moltervot..... opps...
I've actualy just got my Pazzo levers... I'll fit them at the same time as the braided lines ....(When they arrive)
RE: Full systems 4-2-1 - FalcoPerigri - 29-06-2010
(03-05-2010, 10:40pm)Axe Wrote:(03-05-2010, 10:07am)Cb Boy Wrote: Axe...
You've got that bike looking mighty fine...
That full system sounds great...much deeper note than the twin Yoshi slipons I have on mine.
Loved your comment on the non cut Oggy knobs
How do you find the light weight bar ends...do you get much hand tingling?
hahaha cheers mate...
The bar ends are from Voltermoto, same as the Rearsets.... just aluminum with gold over the top....
No chatter or tingling or anything!!
Very soon shes getting a GSX-R 1000 rear end, and plastics,
changing the gearing this weekend, 1 tooth down on the front for starters,
Braided lined and wave rotors going on soon,
hmmm
a TRE and PC5 are comming....
and still tossing up weather or not to get a set of BST Carbon Fiber Wheels Rims...
then I think that'll do....
maybe...
Ash.
BST CF Wheels will be fantastic. Do show us when you get them please!!