Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
Workshop manual for 04 model. - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Workshop manual for 04 model. (/showthread.php?tid=14842)



Workshop manual for 04 model. - bbluesilver - 09-04-2010

Hi, I am trying to find the best place to get a workshop manual for my 04 Busa.

Bassically it has 30,000km on the clock and had it since new.
It has never had a service since or been in the shop I got it brand new.
The only thing I have done is changing the oil and filter every 5-7000km myself.

I have recently noticed a slight rattling noise when starting it up from cold.
Also the clutch is getting very cluncky, when changing gears and also going from netural into first.

So i was going to find out where i can get a workshop manual so I can maybe pull the engine out and apart to check the clearances and the like.

I could send it in to the shop, but a big service like this could cost almost $800 or more, Considering an 04 bike is only valued at maybe $10,000 it far better of taking a look myself.

So if anyone knows where the best place to get a workshop manual for an 04 Busa it would be greatly appreciated.

Cheers.


RE: Workshop manual for 04 model. - Greeny_SA - 09-04-2010

(09-04-2010, 02:09pm)bbluesilver Wrote: Hi, I am trying to find the best place to get a workshop manual for my 04 Busa.

Bassically it has 30,000km on the clock and had it since new.
It has never had a service since or been in the shop I got it brand new.
The only thing I have done is changing the oil and filter every 5-7000km myself.

I have recently noticed a slight rattling noise when starting it up from cold.
Also the clutch is getting very cluncky, when changing gears and also going from netural into first.

So i was going to find out where i can get a workshop manual so I can maybe pull the engine out and apart to check the clearances and the like.

I could send it in to the shop, but a big service like this could cost almost $800 or more, Considering an 04 bike is only valued at maybe $10,000 it far better of taking a look myself.

So if anyone knows where the best place to get a workshop manual for an 04 Busa it would be greatly appreciated.

Cheers.
Look in the download section of this forum .


RE: Workshop manual for 04 model. - ROD - 09-04-2010

or if you need a copy on cd pm me your addy and i will post you one out Pi_thumbsup