![]() |
pipes and drain plugs - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Hayabusa Exhausts (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=11) +--- Thread: pipes and drain plugs (/showthread.php?tid=14636) |
pipes and drain plugs - Greg - 08-03-2010 Hi guys I am thinking about a 4 into 1 system for my 05 busa. I don't know whether this is an issue, but I am concerned about access to the oil drain plug, as I do not want to remove the pipes each time I change the oil. Can you guys please tell me which pipes still give access and which don't. thanks RE: pipes and drain plugs - Greeny_SA - 08-03-2010 (08-03-2010, 04:41pm)Greg Wrote: Hi guys I've got a Yoshi 4-1 0n my 2000 & it doesn't interfere with sump plug removal at all . RE: pipes and drain plugs - CarbonBusa - 09-03-2010 (08-03-2010, 04:41pm)Greg Wrote: Hi guys Would never be an issue, if they ran the headers under the sump plug you would loose too much ground clearance, they would have to run beside the plug as the sump was designed for ![]() RE: pipes and drain plugs - Troopmaster - 09-03-2010 Jesus, look at this, three South Aussies awnser in succesion! ![]() My Brocks 4>1 doesnt hinder access to the sump plug either, Carbon has hit the nail on the head with clearence! RE: pipes and drain plugs - Greg - 10-03-2010 Thanks guys, much appreciated. Makes sense now that it has been pointed out to me. |