+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Need pinout for Power Commander 9v power supply (/showthread.php?tid=14123)
Need pinout for Power Commander 9v power supply - Darren - 24-12-2009
hi all any ine have a pic of ther 9volt powercommander plug or the pin outs so i know which pins power it up?
i need upgrade the firmware hayabusas dont keep it powerd while not running.
darren.
RE: Need pinout for Power Commander 9v power supply - Maj - 24-12-2009
Looking at your plug front on with retaining clip top the 9vdc + is top right and - bottom left
how do you not have one of these, they breed on the bench and i don't use pc's much .. have spare pc plugs but have robbed the 9v terminals if you want one sent
RE: Need pinout for Power Commander 9v power supply - Darren - 24-12-2009
(24-12-2009, 07:40am)Maj Wrote: Looking at your plug front on with retaining clip top the 9vdc + is top right and - bottom left
how do you not have one of these, they breed on the bench and i don't use pc's much .. have spare pc plugs but have robbed the 9v terminals if you want one sent
thanks maj for that ive just put the firmware in worked good.
yes a plug would be good what will it cost me maj ?
RE: Need pinout for Power Commander 9v power supply - Darren - 24-12-2009
hear is a pic o pinouts that i have found for anyone who is intrested.
RE: Need pinout for Power Commander 9v power supply - Maj - 24-12-2009
nothing, pm me your address