+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: correct install of OEM grab rail (/showthread.php?tid=1349)
correct install of OEM grab rail - monyx - 25-03-2006
Just want to make sure I don't crack the bodywork where the pillion rail mounts. I pulled out the two sleeves from the front two bolt holes (two in the rail fit in there, but I left the two sleeves in place for the rear two bolts as it seemed to sit level and spread weight - is the right method?
Sorry if I missed it but I couldn't see specific notes in the owner manual about mount the hand-rail.
Mark <i></i>
grab bar - HAYABUSA ROD - 08-04-2006
you should have received two extra rubbers to replace the ones you took out <i></i>