K8 Sensors/wiring. - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Hayabusa Gen.II (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=45) +--- Thread: K8 Sensors/wiring. (/showthread.php?tid=13447)

K8 Sensors/wiring. - [UNIT] - 26-09-2009 Hi all. I have 2 sensors on the K8 i need some help with regards mounting. What are they and how should they be mounted? The one labeled 1 im not to sure if it needs to be level and touching the spout on something?? The one labeled 2 i see has to be horizontal, but does it need to run side to side on the bike? or can i run it front to back. Also how waterproof is all this stuff? whats stopping water coming up past the battery box to the under seat area? Cheers. RE: K8 Sensors/wiring. - Maj - 26-09-2009 1 air pressure sensor .. just put the spout down but not touching anything, 2 tip over sensor...where it is labled upper needs to be top and it needs to be in the same orientation as std, IE don't turn it 90 deg or you will have engine cutout in hard acceleration and braking RE: K8 Sensors/wiring. - [UNIT] - 26-09-2009 Thanks mate.