![]() |
Uneven wear... - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5) +--- Thread: Uneven wear... (/showthread.php?tid=1326) Pages:
1
2
|
Uneven wear... - chunkylover - 04-03-2006 My front tyres are still from factory, getting them replaced soon. But they are wearing more on the right side. Could this mean i do more right turns? Feel the force. ANGGI<i></i> Re: Uneven wear... - simmo - 04-03-2006 At the end of WSID you have to turn right may be you have been going to fast or you might be going a lot faster into Right hand bends, I know I do Cheers Robert Aren't all 'busas Copper, the others are just copy 'busas!!!!!<i></i> > Re: Uneven wear... - Fat Busa Racing 1347 - 04-03-2006 A few years ago when I was over West OZ I had a little ZXR250 and there was this big round about I used to fly around, I was always cutting up the right side of the rear tyre keeping it on the boil, shit I had alot of fun back then. Your just smashing through the right handers harder than the left thats all. If it were out of wack you would be able to feal it through the bends. Thats my 2 cents worth Reagrds Richard............... <i></i> Re: > Re: Uneven wear... - AstroBusa - 04-03-2006 What a pity you can't even out the wear by taking the wheel off and turning it around. (Please don't try that.... I know you're not stupid chunky... but just in case a newbie wanders across this thread I thought I'd better add it.) The older I get, the better I was. Regards.... Rob <i>Edited by: AstroBusa at: 5/3/06 12:33 am </i> Spoil sport ! - Sumkhun - 04-03-2006 Shit Astro, I would love to pics of the chain driving the disc. <i></i> Methinks - Sumkhun - 04-03-2006 Could be almost as smooth as a Harley <i></i> Re: Methinks - AstroBusa - 04-03-2006 Chunky is asking about his front wheel. The older I get, the better I was. Regards.... Rob <i>Edited by: AstroBusa at: 5/3/06 12:53 am </i> Re: Methinks - Sumkhun - 04-03-2006 Front - back they all look the same to me through the bottom of a glass <i></i> Re: Methinks - AstroBusa - 04-03-2006 Agreed ! The older I get, the better I was. Regards.... Rob <i></i> Re: Methinks - chunkylover - 05-03-2006 Yeah, i wish i could rotate them ha ha ha. But yeah come to think of it i do, i do faster right hand turns, coz before entering my misses house at wattlegrove there are so many round abouts and i fly through them thinking iam rossi ha ha ha Feel the force. ANGGI<i></i> Re: Methinks - baz - 05-03-2006 Chunky - its all to do with the camber they put on the roads. After 2 trips tp PI from NQ (8500k each trip) both sets of front and back tyres were storked badly on the right hand side. not much you can do about it. Baz <i></i> Re: > Re: Uneven wear... - Blackkat - 05-03-2006 Quote:What a pity you can't even out the wear by taking the wheel off and turning it around oops! Be right back got somthing to take care of. Leonard. <i></i> Re: > Re: Uneven wear... - AstroBusa - 05-03-2006 @ Leonard The older I get, the better I was. Regards.... Rob <i></i> Re: > Re: Uneven wear... - rev 01 - 05-03-2006 I'm with Baz on this one <i></i> Re: > Re: Uneven wear... - chunkylover - 06-03-2006 Damn govrnment, fix the damn roads!!! Feel the force. ANGGI<i></i> |