+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Yoshi pipes (/showthread.php?tid=12613)
Yoshi pipes - 276995 - 22-06-2009
My Busa came complete with a ding in one of they pipes. Before I go madly drilling holes, do these come apart if the rivets are removed so I can try and pop it back out?
Steve
RE: Yoshi pipes - big kev - 22-06-2009
steve you can remove the rivits an repair it yeah i did that when my bike feel on my by accident mare didnt take long either
RE: Yoshi pipes - bazooka - 22-06-2009
Drill out the pop rivets and it will come apart - be carefull with the fibreglass matting in the muffler as it will be a tight fit to get back in and use Stainless Steel pops to put it back together -- my 2 bobs worth on it.
Baz
RE: Yoshi pipes - 276995 - 23-06-2009
Thanks Guys, that was what I was hoping for
RE: Yoshi pipes - ohdear - 26-06-2009
***
RE: Yoshi pipes - BLACKZOOK - 26-06-2009
Drill the rivets and cut the outer housing and inner tube. Repack with glass using cable ties to hold the packing tightly in place.
It will sound heaps tougher and it looks better shorter.
There is a post you can search on .org cutting down the exhaust.