![]() |
time to talk - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1) +--- Thread: time to talk (/showthread.php?tid=10951) |
time to talk - bgone - 03-11-2008 ![]() RE: time to talk - humbussa - 03-11-2008 bgone Wrote:Hi Bgone.... ![]() ![]() RE: time to talk - TheShredder - 04-11-2008 some guys have had trouble in 1 form or another with this over the years. When the lever is set in the factory position it seems to struggle to get the lift to engage the top gear fully. Try lowering the lever a bit 1st & see if it helps or change oil brand . shane RE: time to talk - Ozboc - 04-11-2008 bgone Wrote: hi there - where are you ??? i am looking for someone to service my ride - prefer to take it to a guy like you that has a passion for bikes rather than a guy in a motorcycle shop that its just a job to him ....... Busaboc RE: time to talk - busakid08 - 04-11-2008 The K8 seems to have an issue with 5/6th when new - mine settled down after its second service and a good thrashing out back no more miss gears now RE: time to talk - ross79 - 04-11-2008 Hey Andy how's it going? Your usermane is a bit of a give away ![]() As you can see I'll be switching to a busa also as my brother is planning to buy my bike. Will have to catch up as I'm planing a trip your way early next year. The missus now has a thundercat ;) Anyway sorry about going off topic. RE: time to talk - kawasuki - 04-11-2008 bgone Wrote: I would try some of my Militec in the oil Andy. |