cheapest BT015's sydney? - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Hayabusa Tyres, Wheels & Suspension (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=7) +--- Thread: cheapest BT015's sydney? (/showthread.php?tid=10924) |
cheapest BT015's sydney? - jessie928 - 30-10-2008 anyone bought a couple lately? considering they ciould be had for 440/pair fitted during easter, im thinking they may be cheaper ( dreaming??) i need a set pronto, i can fit them Jes RE: cheapest BT015's sydney? - BUSGO - 01-11-2008 Not sure about Sydney prices but I reported a couple of months ago that there was a 20% price hike on all Bridgestone tyres and I had to pay $600 for a pair of BT015s fitted in Newcastle. RE: cheapest BT015's sydney? - LOAFIE - 01-11-2008 Whites Racing Tyres, leathers etc Here is the good deal guys, a few of us have using them tell them you found out about them from the Busa club Campbelltown area Phone Craig on Mobile 0413 461 353 Rydalmere (Parramatta) area Michael 0412 627 742 Number fixed Give them a call you just may get a Pleasant surprise RE: cheapest BT015's sydney? - jessie928 - 03-11-2008 thanks guys :) Jes RE: cheapest BT015's sydney? - TimF - 03-11-2008 Hey Jes how did you go? I was told by a bike shop that the 015s had been replaced and were no longer in production. RE: cheapest BT015's sydney? - BUSGO - 03-11-2008 I reckon that they are wrong Tim. The busa BT015s will be in production for years because they are a spec tyre for the GEN II. Same as the BT056s were in production from 1999 till 2007. Maybe the shop is confusing them with the new BT016s that are fitted as spec on other machines. RE: cheapest BT015's sydney? - LOAFIE - 03-11-2008 TimF Wrote:Hey Jes how did you go? I was told by a bike shop that the 015s had been replaced and were no longer in production. The 015s replaced the 014s RE: cheapest BT015's sydney? - TimF - 03-11-2008 Cheers gents. I was told that the BT021 had replaced the 015. I'm thinking the shop was actually just sold out of 015s and this was their plot to sell me a 021. RE: cheapest BT015's sydney? - BUSGO - 03-11-2008 The BT021 replaces the BT 020 I think. RE: cheapest BT015's sydney? - kawasuki - 03-11-2008 i was told to fark off... RE: cheapest BT015's sydney? - jessie928 - 04-11-2008 TimF Wrote:Hey Jes how did you go? I was told by a bike shop that the 015s had been replaced and were no longer in production. hi man, price was 520 fitted and balanced. ( i didnt buy them) price apparently just went up as was said before. i ended up chucking on pirelli corsa's for 350 the pair fitted and balanced. ( not from that joint) They will do for now. Jes RE: cheapest BT015's sydney? - jessie928 - 04-11-2008 TimF Wrote:Cheers gents. I was told that the BT021 had replaced the 015. yeah its unfortunate , but this is usually the case :) RE: cheapest BT015's sydney? - LOAFIE - 04-11-2008 BUSGO Wrote:The BT021 replaces the BT 020 I think. Correct Busco AND the farkers arnt making it in the 200 wide , now starting the whole width debate but me loves the exit corner grip |