+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Turbo Talk (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=41)
+--- Thread: BB Turbo Oil Feed and Drain Parts List (/showthread.php?tid=10444)
BB Turbo Oil Feed and Drain Parts List - horndog - 16-08-2008
Can anyone tell me what fittings they used to make up their turbo oil feed and drain lines for a Garrett BB GT28 turbo?
I am thinking 3/8 single wire hydraulic hose for the feed but am not sure what works best for the fittings. Are you using banjo bolts, stright nipples, 45 or 90 deg nipples?
What size drain hose are you using?
RE: BB Turbo Oil Feed and Drain Parts List - Legend - 16-08-2008
Dash 4 (-4) braided stainless steel (dont skimp on this line as its pretty hot in that area.
There is a special nipple that fits the turbo and converts to -4 fitting.
A couple of 90 deg bends wont upset things.
Drain back, I always use -10 push fit hoses and fittings, try to use the least amount of bends.
Leonard.
RE: BB Turbo Oil Feed and Drain Parts List - Maj - 16-08-2008
11mm recessed tapered seat , is the garrett thread.