+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: ZZZZZ (/showthread.php?tid=14628)
ZZZZZZZZ - GRUNTMAX - 22-04-2010
Apologies,
Deleted
RE: 1580cc Supercharged ??? - Maj - 23-04-2010
You gunna run a AC pump off the belt too ??
Radiator and pump work good on the street, water is a great heatbank, takes a while to warm up and releases remp in similar style , so your inlet temps are more consistant, and when not at high inlet air temps it cools both from the external radiator and the incoming inlet air
ZZZZZZ - GRUNTMAX - 23-04-2010
Apologies,
Deleted
ZZZZ - GRUNTMAX - 23-04-2010
Apologies,
Deleted
RE: 1580cc Supercharged ??? - GRUNTMAX - 26-04-2010
Watch out for Roos, Emus ----- and pigs
[attachment=9439]
RE: 1580cc Supercharged ??? - jason - 26-04-2010
Any photos of the build
ZZZZZZ - GRUNTMAX - 26-04-2010
Apologies,
Deleted
RE: 1580cc Supercharged ??? - GRUNTMAX - 27-04-2010
Deleted
ZZZZZ - GRUNTMAX - 30-04-2010
Apologies,
Deleted
zzzzzzzzzz - GRUNTMAX - 01-05-2010
Deleted
zzzzzzzzzzzzzzz - GRUNTMAX - 03-05-2010
Apologies,
Deleted
RE: 1580cc Supercharged ??? - Maj - 03-05-2010
don't need it... also would interfere with exhaust fit
ZZZZZZZZZZZ - GRUNTMAX - 03-05-2010
Apologies,
Deleted
RE: 1580cc Supercharged ??? - Maj - 03-05-2010
Sumps with swinging pickups are square edged, no exhaust cutout as the drag guys using them run sidewinder exhausts for ground clearance and there is no need to try and fit anything under the motor, maybe a 1" sump would fit but you would loose a lot of oil capacity and induce oil surge probs that are not evident on a std setup on the street.
All motor guys would know the better exhausts, but i would think a big bore exhaust, would be needed for the motor capacity + the "extra capacity" blown in, maybe a Sumo ???
RE: 1580cc Supercharged ??? - Camel - 03-05-2010
Hey Grunty,
the swinging oil pickup sump is deeper than the standard sump. Here's the standard 'winged keel' sump (in that eerie green colour that Hot Rod magazine used to call colour back in the 60's; any one else remember them?)
![[Image: WaterPumpcopy.jpg]](http://i156.photobucket.com/albums/t20/camel_geselle/Dry%20Sump/WaterPumpcopy.jpg)
Here's a one inch deep 'SBD' dry sump I fitted to a busa donk (silent but deadly?)
![[Image: Complete_002.jpg]](http://i156.photobucket.com/albums/t20/camel_geselle/Dry%20Sump/Complete_002.jpg)
And lastly a swinging oil pickup sump I fitted to another Busa. Deep man, real deep.
![[Image: Sump_01copy.jpg]](http://i156.photobucket.com/albums/t20/camel_geselle/Sump_01copy.jpg)
As for an exhaust, hey make your own! I do. Sand bending man, beautiful curves, no ghastly welds, (except for the collectors, but as you can see, I fix them too!).
![[Image: UPYA.jpg]](http://i156.photobucket.com/albums/t20/camel_geselle/UPYA.jpg)
![[Image: Collectordie2.png]](http://i156.photobucket.com/albums/t20/camel_geselle/Collectordie2.png)
![[Image: DSC_0293copy.jpg]](http://i156.photobucket.com/albums/t20/camel_geselle/DSC_0293copy.jpg)
![[Image: collectors1copy.png]](http://i156.photobucket.com/albums/t20/camel_geselle/collectors1copy.png)
![[Image: collectors3copy.png]](http://i156.photobucket.com/albums/t20/camel_geselle/collectors3copy.png)
When are we gonna see some pics of the 1580 Grunt?
Camel