+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bling Bling Sales Counter (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=36)
+--- Forum: For Sale - Vendors (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=18)
+--- Thread: KANEG's Hayabusa Club HOT OFFERS (/showthread.php?tid=3072)
Re: Head Lifters - Xhiler8r - 01-08-2006
Pete do you only make stands for sports bikes or do you do them for cruisers also i wiould like to find out what is out there to lift my 300+ kg cruza off the ground Cheers Bill
The cured Blingaholic
<i></i>
Re: Head Lifters - Kaneg - 01-08-2006
Hey Bill,
No, sorry we only import the sportsbike stands and there is a fair bit to learn and expand into just through that if you want to be thorough.
Cheers,
Pete <i></i>
Re: Head Lifters - Maggot1300 - 03-08-2006
Just figured i'd let everyone know, that my rear paddoc stand and sliders (just in case I get to play with another 4WD) turned up today. I gotta say, great people to deal with and they were delivered within a week of me asking about them. a
Pete, I'll email you about a front stand and a few other bits. Thanks again mate
Matt <i></i>
Head Lifter - Kaneg - 05-08-2006
Hey Darryl,
Thanks for the info.
There is good news and there is bad news.....
First the good one : We have been able to order another 5 different sizes of pins for the the head lifting stands
Now, the bad one : the sizes of them are not smaller, but bigger than the 18mm. So, the extra 5 pin sizes are as follows: 19, 20, 21, 24 & 27mm. So I think the simplest is to machine the 13 mm one down to 12
Cheers,
Pete
<i></i>
reply - Kaneg - 05-08-2006
Thanks Matt,
It's good to hear that you happy with them.
Cheers,
Pete <i></i>
Re: reply - Volvi - 06-08-2006
seeing were talking about bike stands I want to ask this of the board. I have an Action paddock stand (rear) that I always used the L brackets for some reason lost the V brackets. Recently I found a spare set of V's that fit and bought the whatchamacallit knobs for the swingarm. But when I align the V's the stands handlebar is almost verticle and almost impossible to lift the bike up, where am I going wrong? <i></i>
Re: reply - pan - 06-08-2006
Have you tried rotating the V's by 90 degrees (ie: remove them from the stnad and place them in after turning 90 degrees)?
"sometimes crime does pay"<i></i>
Re: reply - Volvi - 06-08-2006
ahh excellent point pan, it never occured to me to do that thx will let u know next time i try. shud I be saying DOH <i></i>
Thingys - BUSGO - 06-08-2006
Hey Volvi,
Those thingys you place the stand under are called Bobbins.
<i></i>
Re: Thingys - Volvi - 07-08-2006
Tried that pan and no it didnt work out as the V can only be in one position to be vertical upright. I did manage to get the bike up but required way to much pressure on handlebar as handlebar was too vertical too. I wonder if im the only one having such difficulty.
Busgo, right throbbings I mean bobbins. <i></i>
Re: Thingys - pan - 07-08-2006
Okay, so this is another long-shot, but all the technically minded people don't seem to be responding, so here goes...
Maybe switch the right and left side? <i></i>
Thingys - Taubusa - 07-08-2006
Volvi I have the same problem as you. It take all my effort to get my bike up onto the rear stand and I can't do it alone.......I need someone else to hols the bike while I lift......and here I was thinking that this was the status quo with paddock stands. Not sure how to fix it. <i></i>
How to lift? - BUSGO - 07-08-2006
Volvi and Taubusa,
Are your stands ones from Kaneg?
If they are the same as mine in the photo earlier in the thread, the two sides are marked left and right and if they are not put together properly, the wheels don't sit flat on the floor.
This may be your problem.
Rgds BUSGO
"TAKE MY ADVICE"
I'm not using it anyway!<i></i>
Re: How to lift? - fasterfaster1 - 07-08-2006
Could be just poor stand design > ie leverage effect. The best and easiest I have found is the Anderson Stand they put out for the TL1000 as it's extra long in the rear to clear the rear guard as you lift and gives more leverage hence lifts with less effort.
FF1 <i></i>
Re: reply - Maj750t - 07-08-2006
Volvi if yout "V" ends are not the correct ones they may change the leverage and positioning of the stand. <i></i>