+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Clutch Shutter (/showthread.php?tid=14739)
Pages:
1
2
RE: Clutch Shutter - Legend - 29-03-2010
Try putting 3-4mm spacers under each "stock" clutch spring and see whats the result, if its better do the same with the heavy springs.
If the btl and the rest of the clutch is Aok (and it should be re. kms) this is all I can think of without seeing it first hand.
Leonard.
RE: Clutch Shutter - 463046 - 29-03-2010
(29-03-2010, 09:24pm)Legend Wrote: Try putting 3-4mm spacers under each "stock" clutch spring and see whats the result, if its better do the same with the heavy springs.
If the btl and the rest of the clutch is Aok (and it should be re. kms) this is all I can think of without seeing it first hand.
Leonard.
Thanks for the info Leonard. About 4 weeks till next meet where i will try it out.
Steve
RE: Clutch Shutter - sprinta - 30-03-2010
all 99 / 2000 Busas had the same problem with clutch grab, the 2001 on models had a modified inner plate, spring and washer - we know it as the wavy washer mod.
If it hasn't been uprated simply get yourself the later inner plate and washers and take out the innermost plate.
For more performance you really need to consider either a welded centre or a billet centre
lastly only use genuine Suzuki clutch components they can quite adequately tolerate 700hp. You can fit K8 plates which have a greater area of friction material
RE: Clutch Shutter - Legend - 30-03-2010
While the cone washer, seat and (special)thin plate will indeed improve clutch operation, installation of these parts without increasing spring pressure (after btl mod) will have a negative effect on the clutch as the cone works against the clutch springs as it pushes the inside steel away from the first fibre.
Leonard.
RE: Clutch Shutter - 463046 - 30-03-2010
Thanks guys. Have ordered the washers and plate today. Have also machined up some spacers to go under the springs. Will be interesting to see how it goes in a few weeks.
RE: Clutch Shutter - 463046 - 06-04-2010
While waiting for my parts to arrive I thought I might as well change the clutch fluid. To my surprise the master cylinder had a thin layer of sludge in the bottom which had also worked its way into the piston. The slave cylinder also needed cleaning. So I have ordered rebuild kits for both as well. This may have been the cause to my problem all this time
So please check your fluid as mine looked pretty clean in the sight glass.Steve.
RE: Clutch Shutter - Countbusa - 10-04-2010
While you're overhauling the clutch master and slave cylinders,you may want to put a clutch slave cylinder dust grommet in.The early Gen 1 busas suffered from dirty or black clutch master cylinder fluid.This problem was caused by the drive chain lubricant entering through the clutch slave cylinder,contaminating the clutch fluid causing it to turn black in colour. Suzuki rectified this problem with a dust cover that fits over the clutch slave cylinder and piston with a small hole in the center for the clutch push rod. From memory the dust grommet is from the 2005 model inclusive onwards.The dust grommets are relatively inexpensive and a worthwhile investment to your clutch master and slave cylinder system.
RE: Clutch Shutter - abusa - 10-04-2010
http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/2/Make/Suzuki/YearID/45/Year/2004/ModelID/6203/Model/GSX1300R_HAYABUSA/GroupID/251908/Group/CLUTCH
RE: Clutch Shutter - 463046 - 03-05-2010
Hi all good news. Had a test and tune saturday and got in about 12 passes and no hint of clutch grab or shutter what so ever
. Same on sunday. The clutch now feels like a cable operated one, totally awesome. A big thankyou to all who helped out
. To all having the same dramas do this mod and check your clutch cylinders you won't be dissapointed 