+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Turbo Talk (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=41)
+--- Thread: turbo for gen2? (/showthread.php?tid=11332)
Pages:
1
2
RE: turbo for gen2? - jamieBezzina - 25-09-2009
Maj not to sure as yet as mate. But i think i will going the powermod way as i know they work fine and only take around 6 dyno runs to tune. We are using the second bank of injectors for tuning under boost.
RE: turbo for gen2? - Maj - 26-09-2009
Powermod is a good unit ,no doubt.
I'm looking forward to the day that we can fit a turbo kit and tune the std ecu to suit , looks like its here for the gen 2's and not far off for the gen 1.
was quite impressed the day i converted my gen 1 to 550cc injectors, flashed the ecu to let it know there was a size change then started and ran like std, only thing there was the piggyback needed to be able to increase the on time beyond 100% as this was only ~70% duty cycle (and mine went to 99% ontime)
RE: turbo for gen2? - jamieBezzina - 26-09-2009
They are a good unit Maj still using it on mine. I just need to up the RPM on mine as still have stock rev limit and its a pain it the ass when Racing. Things happen way to fast in 1st 2nd and 3rd when your leaving off the line at 8500rpm.
RE: turbo for gen2? - Maj - 27-09-2009
Update on the reflashing for boosted application on gen 2
http://www.suzukihayabusa.org/forum/index.php?topic=142626.0