Paddock Stand - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Hayabusa Tyres, Wheels & Suspension (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=7) +--- Thread: Paddock Stand (/showthread.php?tid=16915) Pages:
1
2
|
Paddock Stand - sutur - 21-03-2011 What do you guys think of this?: http://cgi.ebay.com.au/MOTORCYCLE-BIKE-REAR-RACE-PADDOCK-STAND-CBR-GSXR-R1-/190511666065?pt=AU_Motorcycle_Parts_Accessories&hash=item2c5b615391 Thoughts, comments? RE: Paddock Stand - bandit - 21-03-2011 try here forum sponser tell them your from here http://www.kaneg.com.au/products/Combo-%252d-Front-%26-Rear-Stands-%252d-Black.html RE: Paddock Stand - ROD - 21-03-2011 (21-03-2011, 08:56pm)sutur Wrote: What do you guys think of this?: cheap But want be if your bike falls on the ground I had a cheap front stand break on me i still dont no how i saved the bike from damage RE: Paddock Stand - bazman - 21-03-2011 seems like a great price, sutur.... i have seen similar looking ones being used with no probs. i didn't notice how much they wanted for postage, but?!? RE: Paddock Stand - sutur - 22-03-2011 (21-03-2011, 10:15pm)ROD Wrote:(21-03-2011, 08:56pm)sutur Wrote: What do you guys think of this?: It snapped?! Were you sitting on it? Did it the stand appear shitty to start with? Was it the spools or the actual stand? How long ago did this happen? Did you pay next to nothing for it? RE: Paddock Stand - BikerBoy - 22-03-2011 They look remarkably identical to the Kaneg stands...........same o/s manufacturer maybe????? I'd buy it Sutur. RE: Paddock Stand - ROD - 22-03-2011 (22-03-2011, 06:01am)sutur Wrote:(21-03-2011, 10:15pm)ROD Wrote:(21-03-2011, 08:56pm)sutur Wrote: What do you guys think of this?: The stand Broke it was a very cheep head stem front stand i was not sitting on it was just about to put front wheel on and away to one side it went Im not saying dont buy the stand that is your choice you never no the stand might out last you RE: Paddock Stand - DAVE01 - 22-03-2011 I agree with Bandit, play it safe, a lot of us are using Kaneg stands and they aren't much more expensive and they are a great company to deal with. RE: Paddock Stand - BEAU - 22-03-2011 What are the welds like on the Keneg stands? I hope there nothing like the welds on the trailer mate I bought through them. Sutur, why would you trust a stand worth $65 to hold up your pride and joy?? RE: Paddock Stand - sutur - 22-03-2011 (22-03-2011, 11:47am)BJK1 Wrote: Sutur, why would you trust a stand worth $65 to hold up your pride and joy?? Damn good point when it's written that plainly :) RE: Paddock Stand - jamdonut - 23-03-2011 I use the Kaneg stands and make sure that they are not exposed to weather that might weaken then, I think Kaneg are good, but at the same time I would not sit on the bike when thre on them or with any other stand thats for sure. RE: Paddock Stand - gggsxr11 - 24-03-2011 i just bought that stand,is ok for the money,not perfect though, 1. the wheels are not parrallel so moving it causes stress on the wheel mount and the circlip pops off. 2. the height of the bike on the stand is way too high making it hard to lift. 3, the front edge of the bobbin grabs almost clips the swingarm and scratches it. i modified mine first day i got it and fixed all those faults,took me about 2 hours. anything else you would like me to find fault with let me know. RE: Paddock Stand - BLACKZOOK - 24-03-2011 I have 5 Kaneg stands and have had no problem with them. If there was a problem Peter will bust a nut to make sure it is resolved. I have seen him replace stuff that was way outside waranty. Agreat vendor all round. In my experience head lift stands will not work on a busa unless you take the nose cone off first. Can anyone name a head lift stand that doesnt touch the nose cone during the lift? BTW I also have a set of Anderson stands (front & rear) that are nice to look at but are a major effort to actually lift the bike with, they also hit the nose cone and cause stress to the front panels. RE: Paddock Stand - sutur - 25-03-2011 (24-03-2011, 08:59pm)gggsxr11 Wrote: i just bought that stand,is ok for the money,not perfect though, Brillant, thanks for the heads up mate Love this forum! RE: Paddock Stand - Troopmaster - 25-03-2011 Hi all, for what its worth, i just bought a Head Lifter and Rear Stand for my K9, a smidge under $200 delivered is fantastic, BLACKZOOK your rite, Peter cant do enough to help. Certinally worth considering at the very least! Matt. |